News

In order to use the appropriate equipment for your applications in electrical engineering and industrial automation, it is important to understand the differences between a Frequency Converter and Variable Frequency Drives (VFDs). Both types of systems are used to control the speed of motors by changing the frequency of the input power, but their applic...

To test a thermal relay, use a multimeter set to resistance mode and check for continuity across the relay terminals—a functioning relay shows low resistance when normal and an open circuit when tripped. For three-phase thermal relays, perform this test on each phase. If the relay fails to trip under overload, inspect the current settings, reset m...

AC contactors are an essential part of operating motors and controlling lighting. An AC contactor is an electrically actuated switch that controls a high-voltage (line side of the contactor) circuit, providing an efficient and reliable way to control a variety of different applications. By understanding how AC contactors operate, you can improve the per...

Magnetic starters control electrical systems and motors in a safe, reliable, and simple way. With new technology, many people ask whether remote control is possible. The answer is yes. But there is more to consider than just whether it can be done. This section explains how a magnetic starter works, its advantages, and how remote control can be achieved.

The difference between a converter and an inverter can be confusing since they are often confused as being the same thing; however, there is a significant difference between these two devices as well as their intended applications. In this article, we’d like to clarify the distinctions between converters and inverters by defining each one, discuss...

When your air conditioning system is not performing optimally, it can be easy to overlook the role of the AC contactor switch. Although most people will usually look at the compressor or refrigerant levels to find out why their unit isn't working as well as they should, if the AC contactor switch is not functioning properly, it may cause issues with oth...

Whether you're working on a small appliance, commercial HVAC unit, or industrial machinery, you've likely encountered an electrical contactor. This remote-controlled switch safely powers high-current loads like motors and compressors without directly handling high-voltage circuits. For many buyers, the biggest question is how to connect an electrical co...

When setting up motors in industrial, commercial, or serious workshop environments, one question comes up again and again: what size motors need overload protection? It’s a simple question, but getting it right is essential for safety, reliability, and compliance. Overload protection is typically required for motors of 1 HP or larger, though the ...

A thermal relay is a primary type of circuit breaker that helps protect electrical devices from overheating due to excess current or short circuits. This article discusses the functionality of thermal relays, their advantages, typical issues, answers to common questions, and why they are essential in today’s applications.

If you've ever opened an industrial control panel or looked inside a commercial HVAC unit, chances are you've spotted a compact device that quietly handles the heavy lifting of electrical switching. That device is likely an AC magnetic contactor. While it may not be the most glamorous component, it plays a critical role in keeping motors, compressors, l...